 |
 |
|
MBD-C2SBA -O |
- C2SBA (Standard Retail
Pack)
|
|
MBD-C2SBA -B |
|
| |
|
|
|
Form Factor |
|
|
Dimensions |
- 12.0" x 9.6 ", (30.5cm x
24.4cm)
|
| |
|
|
|
CPU |
- Single LGA775 ZIF Socket
- Supports an Intel®
Core™2 Quad Q9000/Q6000 series
processor
- Supports an Intel®
Core™2 Duo E8000/E6000 series
processor
- Supports an Intel®
Pentium® dual-core E2000 series
processor
- Supports an Intel®
Celeron® 400 series processor
|
|
System Bus |
- 1333 / 1066 / 800 MHz
system bus
|
| |
|
|
| Memory
Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of
unbuffered, non-ECC DDR2 800/667MHz memory
(Dual Channel)
|
|
Memory Type |
- DDR2 800/667MHz unbuffered,
non-ECC SDRAM, 240-pin gold-plated DIMMs
|
|
DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2 GB
|
|
Memory Voltage |
|
| |
|
|
|
Chipset |
|
|
Serial ATA |
- Intel® ICH9 SATA2 (3 Gbps)
controller built-in
|
|
Network Controllers |
- 1 x Intel® 82566 Gigabit
Ethernet
- Supports 10 BASE-T, 100
BASE-TX, and 1000 BASE-T with RJ45 output
|
| Audio |
- High Definition 7.1 Channel
Audio
|
| Video |
|
|
Super I/O |
|
|
Clock Generator |
|
| |
|
|
|
Serial ATA |
- Four Serial ATA ports
(3Gbps)
- Four SATA hard drives
supported
|
|
Floppy |
- 1 Floppy controller; 1.44
MB
|
|
LAN |
|
|
USB |
- 12x USB 2.0 / 1.1
compatible
- 6 rear + 2 Type A
connectors + 2 headers (4 ports)
|
| Audio |
- High Definition 7.1 Channel
Audio
- Line-in / Line-out /
Microphone Ports
|
|
VGA |
|
|
Keyboard / Mouse |
- PS/2 keyboard and mouse
ports
|
|
Serial Ports |
- 1x Fast UART 16550 serial
port
- 1x Serial Header
|
|
Parallel Port |
- 1x ECP / EEP Parallel Port
|
|
|
|
|
|
|
|
Mid-Tower |
- CSE-733i-450
- CSE-733i-645
- CSE-733T-450
- CSE-733T-465B
- CSE-733T-645
- CSE-733TQ-465B
|
|
Tower / 4U Rackmount |
- CSE-742i-450
- CSE-743TQ-865B
|
|
Important Note |
- To ensure system stability,
a 420W (minimum) ATX power supply [4-pin
+12V AND (20 or 24-pin)] is required.
|
| |
|
|
|
PCI-Express |
- 1 (x16) PCI-e slot
- 1 (x4) PCI-e slot (using x8
slot)
- 1 (x1) PCI-e slot
|
|
PCI |
- 4x 32-bit 33MHz PCI (5V)
slots
|
| |
|
|
|
BIOS Type |
- 16Mb Flash EEPROM with SPI
BIOS®
|
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
|
|
|
Software |
- Super
Doctor III
- Watch Dog
- NMI
- Hardware monitor in
W83627DHF (PECI support)
|
|
Power Configurations |
- ACPI Power Management
- Main Switch Override
Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from
Soft-Off
- Power-on mode control for
AC power recovery
- Internal / External modem
remote ring-on
- Suspend to RAM (STR)
|
| |
|
|
|
CPU |
- Monitors for CPU Cores,
+1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby,
VBAT
- CPU Core 3-Phase-switching
voltage regulator with auto-sense from
0.8375V-1.6000V
- Adjustable CPU clock
frequency ratio
|
|
FAN |
- Total of five 4-pin fan
headers
- 3 x fans with tachometer
monitoring
- Status monitor for speed
control
- Status monitor for on / off
control
- Support 3-pin PWM fans (without
speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM)
fan conn.
|
|
Temperature |
- Monitoring for CPU and
chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2)
Support
- PECI
|
|
LED |
- CPU / System Overheat LED
- Standby power alert LED
|
|
Other Features |
- Chassis intrusion Detection
- Chassis intrusion Header
|
| |
RoHS
|
- RoHS Compliant 6/6, Pb Free
|
|
Environmental Spec. |
- Operating Temperature:
10°to 35°C (50°to 95°F)
- Non-operating Temperature:
-40°to 70°C (-40°to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative
Humidity: 5 to 95% (non-condensing)
|
| |
|
|
|
FCC |
|
|
