 |
 |
|
MBD-PDSBM-LN1-O |
- PDSBM-LN1 (Standard Retail
Pack)
|
|
MBD-PDSBM-LN1-B |
|
| |
|
|
|
Form Factor |
|
|
Dimensions |
- 9.6" x 9.6 ", (24.4cm x
24.4cm)
|
| |
|
|
|
CPU |
- Single LGA775 ZIF Socket
- Supports a Dual-Core
Intel® Xeon® 3000 Series
processor
- Supports an Intel®
Core™2 Duo Series processor
- Supports a Dual-Core
Intel® Pentium® D processor
- Supports an Intel®
Pentium® 4 processor
- Supports an Intel®
Celeron® D processor
-
Note:
Supports 95 watt and lower processors only
|
|
System Bus |
- 1066 / 800 / 667 MHz system
bus
|
| |
|
|
| Memory
Capacity |
- Two 240-pin DIMM sockets
- Supports up to 4 GB of
unbuffered, non-ECC DDR2 667/533MHz memory
(Single / Dual Channel)
|
|
Memory Type |
- DDR2 667/533MHz unbuffered,
non-ECC SDRAM, 240-pin gold-plated DIMMs
|
|
DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2 GB
|
|
Memory Voltage |
|
| |
|
|
|
Chipset |
- Intel 946GZ
- ICH7R + Intel® 82573
|
|
Serial ATA |
- Intel® ICH7R SATA2 (3 Gbps)
controller built-in
- Intel:
RAID 0, 1, 5, 10 support (Windows Only)
- Adaptec:
RAID 0 (Two, three, four drives only)
RAID 1 (Two hard drives only)
|
|
Network Controllers |
- 1 x Intel® 82573 Gigabit
PCI-Express Ethernet
- Supports 10BASE-T,
100/1000BASE-TX, RJ45 output
|
| Graphics |
- On Chip Intel 946GZ video
|
|
Super I/O |
|
|
Clock Generator |
|
| |
|
|
|
Serial ATA |
- Four Serial ATA ports (
3Gbps )
- Four SATA hard drives
supported
|
|
IDE |
- One EIDE channel supports
up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO
Mode 4, and ATA/100
|
|
Floppy |
- 1 Floppy controller; 1.44
MB
|
|
LAN |
|
|
USB |
- 4x USB 2.0 / 1.1 compatible
- 2 in front (FUCI), 2 in
rear
|
| VGA |
|
|
Keyboard / Mouse |
- PS/2 keyboard and mouse
ports
|
|
Serial Ports |
- 1x Fast UART 16550 serial
port
- 1x Serial Header
|
|
|
|
|
|
|
|
1U |
- CSE-811T-300
- CSE-513F-260 (Mini 1U)
- CSE-512F-260 (Mini 1U)
- CSE-813MFT-300C (OEM and
SuperServer only)
|
1U
(For Low-Voltage CPU only) |
- CSE-811T-260
- CSE-512C-260 (Mini 1U)
- CSE-512L-260 (Mini 1U)
- CSE-513L-260 (Mini 1U)
|
|
Important Note |
- Only Supermicro 1U chassis
is recommended for 1U Building Block
Solutions
|
| |
|
|
|
Universal Slot |
- 1 (x4) (x8 physical)
PCI-Express Slot OR
- 1x 32-bit 33MHz PCI Slot
|
|
PCI |
- 1x 32-bit 33MHz PCI (5V)
slots
|
| |
|
|
|
BIOS Type |
- 8Mb Flash EEPROM with
PhoenixBIOS®
- Winbond W39V080FAP
|
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- Hardware BIOS Virus
protection
- SMBIOS 2.3
|
| |
|
|
|
Software |
- Super
Doctor III
- Watch Dog
- NMI
|
|
Power Configurations |
- ACPI/APM Power Management
- Main Switch Override
Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Suspend to RAM (STR)
- Power-on mode control for
AC power recovery
- Internal / External modem
remote ring-on
|
| |
|
|
|
CPU |
- Monitors for CPU Cores,
+1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby,
VBAT, HT, Memory, Chipset
- CPU Core 4-Phase-switching
voltage regulator with auto-sense from
0.8375V-1.6000V
|
|
FAN |
- Total of five 4-pin fan
headers
- 5 x fans with tachometer
monitoring
- Status monitor for speed
control
- Status monitor for on / off
control
- Support 3-pin PWM fans (with
speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM)
fan conn.
|
|
Temperature |
- Monitoring for CPU and
chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan
Connectors
- I2C temperature sensing
logic
- Thermal Monitor 2 (TM2)
Support
- PECI
|
|
LED |
- CPU / System Overheat LED
- Suspend-state indicator LED
- +5V standby alert LED
|
|
Other Features |
- Chassis intrusion Detection
- Chassis intrusion Header
- SDDC Support
|
| |
RoHS
|
- RoHS Compliant 6/6, Pb Free
|
|
Environmental Spec. |
- Operating Temperature:
10°to 35°C (50°to 95°F)
- Non-operating Temperature:
-40°to 70°C (-40°to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative
Humidity: 5 to 95% (non-condensing)
|
| |
|
|
|
FCC |
- Passed to meet FCC standard
requirement
|
|
